Interconnects Devices and Computers on WiGig technology for High Speed Media Rich DataCommunications. Multi-gigabit wireless communications using the unlicensed 60 GHz spectrum.
The WiGig specification allows devices to communicate without wires at multi-gigabit speeds. It enables high performance wireless data, display and audio applications that supplement the capabilities of previous wireless LAN devices. WiGig tri-band enabled devices, which operate in the 2.4, 5 and 60 GHz bands, deliver data transfer rates up to 7 Gbit/s, about as fast as an 8-band 802.11ac transmission, and more than 11 times faster than the highest 802.11n rate, while maintaining compatibility with existing Wi-Fi devices.
The 60 GHz signal cannot typically penetrate walls but can propagate off reflections from walls, ceilings, floors and objects using beamforming built into the WiGig system. When roaming away from the main room the protocol can switch to make use of the other lower bands at a much lower rate, both of which can propagate through wall "The Wi-Fi Alliance and the Wireless Gigabit Alliance (WiGig Alliance) today announced a cooperation agreement for multi-gigabit wireless networking" - Wi-Fi & WiGig cooperate
WiGig version 1.0 specification Includes data transmission rates up to 7 Gbps. Backward compatible with the IEEE 802.11 standard.
The WiGig specification will allow devices to communicate without wires at multi-gigabit speeds. It enables high performance wireless data, display and audio applications that supplement the capabilities of today's wireless LAN devices.
"This SoC is designed to support frequencies ranging from 2 to11GHz in both licensed and unlicensed bands. Fujitsu's WiMAX SoC is fully compliant with the IEEE 802.16-2004 WiMAX standard...." - https://www.fujitsu.com/
Fujitsu MB86K71 RF Module
This new RF module from Fujitsu, the world's smallest to feature all of the RF circuits necessary for Mobile WiMAX devices including RF-IC, antenna switches, a power amplifier, filters, and an oscillator circuit......
The Fujitsu WiMAX SoC, MB87M3400, fully complies with the IEEE 802.16-2004 standard using an OFDM PHY. The SoC can operate in TDD or FDD modes and supports all the available channel bandwidths from 1.75MHz up to 20MHz bandwidths.
A programmable frequency selection generates the sample clock for any desired bandwidth. When applying 64QAM modulation in a 20MHz channel and using all 192 sub-carriers, the chip can sustain up to 100Mbps peak raw data speed. Uplink subchannelization is supported as defined in the standard.
Wireless USB is the first high-speed wireless personal interconnect technology to meet the needs of multimedia consumer electronics, PC peripherals, and mobile devices. Wireless USB - Wireless Extension to USB
Wireless USB performance is targeted at 480Mbps at 3 meters and 110Mbps at 10 meters..
Wireless USB will support robust high-speed wireless connectivity by utilizing the common WiMedia MB-OFDM Ultra-wideband (UWB) radio platform as developed by the WiMedia Alliance.
Lantronix network enablement solutions connect almost any peripheral electronic device to a network or the Internet, enabling it to be remotely accessed, monitored and controlled. Have a look at the Networking Technology Tutorials. - https://www.lantronix.com/
Lantronix - Wireless Device Networking
xPico - Embedded Wireless Device Server
"Lantronix xPico Wi-Fi, one of the world’s smallest and most flexible Wi-Fi device servers. xPico Wi-Fi is a pin and form factor compatible state-of-the-art member of the xPico family, providing low power, Soft AP and simultaneous client mode, full IP and WLAN stacks. The xPico Wi-Fi is a complete device server suitable for mobile M2M applications..."
"Enable Your Tablet & Smartphone, Access your data and devices from anywhere, wired or wireless. Lantronix industry-proven device server application and protocol stacks enables seamless remote access to device data, simplifying design integration, all while providing robust connectivity......."
Embedded Device Gateway SoC Co-Processor
Connects to host microcontroller for serial to Ethernet (LAN) applications. Robust networking and applications firmware included - no coding required; zero royalty licensing agreement.
Simply connect the serial port to the XChip Direct and load the Lantronix supplied royalty free standard application and network protocol firmware in an external Flash chip. Finish by adding an RJ45 jack and magnetics to instantly connect virtually any product to an Ethernet network or the Internet!
"Handheld access to process data allows users in the field to view the latest plant information while on the move, significantly enhancing operational performance" -
Honeywell Mobile Wireless Productivity - https://www.honeywellprocess.com/
Mobile Productivity - Mobile Station
"Using a wireless Station tablet or other handheld device, Mobile Station solutions simplify security and minimize performance impact on the control system."
"Mobile Access for Station provides read-only and write access to Experion graphics with dynamic data. This is accomplished via a Terminal Client connection to a Remote Engineering and Station Server (RESS) loaded with Station and Terminal Services. Using the Terminal client installed on the Tablet PC..."